Find a store near you that sells Simer® products. Use our Store Locator.
Have a question about your product?
Just because you're having a problem does NOT mean there's nothing you can do. Our troubleshooting section has lots of tips and simple tests so you can determine whether the problem is simple or not. In most cases, you can get your pump up-and-running using these simple tips.
Phone, Email, or Write To Us
Find out how on our Contact Us page using the link below
Backs up your main sump pump. Operates any time your main pump cannot, whether it's because of power outage or main pump failure.
1-year limited warranty
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: (roughly equivalent to 1/4 HP)
MAXIMUM HEAD: 16'
MAXIMUM CAPACITY: 2000 GPH
FLOW AT 10' LIFT: 1200 GPH
SWITCH TYPE: Vertical
SWITCH ON/OFF LEVELS: Depends Upon Installation
MINIMUM SUMP DIAMETER: 13-1/2" (if depth is more than 22"
MINIMUM SUMP DEPTH: 18" (if diameter is 22" or larger)
DISCHARGE PIPE SIZE: 1 ¼" (male) NPT
MINIMUM PIPE SIZE: 1-1/4"
MAXIMUM SOLIDS HANDLING: 1/4"
AMP DRAW: pump draws 9.6 amps at full flow / AC amp draw is minimal
VOLTAGE: Input: 115v AC, 60 Hz Output to Pump: 12v DC
RECOMMENDED BREAKER: 10 amps