3410P | 1 HP THERMOPLASTIC SPRINKLER SYSTEM PUMP
 

Print  print

Performance

Where To Buy

Find a store near you that sells Simer® products.  Use our Store Locator.

Frequently Asked Questions

Have a question about your product?

Winterizing

Learn helpful tips to keep your pump performing properly throughout the winter months

Troubleshooting

Just because you're having a problem does NOT mean there's nothing you can do.  Our troubleshooting section has lots of tips and simple tests so you can determine whether the problem is simple or not.  In most cases, you can get your pump up-and-running using these simple tips.

Product Images

Model 3410P

1 HP Thermoplastic Sprinkler System Pump

With a combination of good flow and good pressure, these pumps are perfect for your in-ground sprinkler system.

Key Features
  • Superior performance at depths to water of 20' or less
  • Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance
  • Ready-to-install 230 volt motor (dual voltage)
  • Self-priming after pump housing is initially filled (Check Valve or Foot Valve required)
Warranty

1-year limited warranty

Specifications    
Resources    

 

BODY CONSTRUCTION:  Thermoplastic

HORSEPOWER:  1 HP

MAXIMUM CAPACITY:  55 GPM

FLOW AT 10' LIFT AND 30 PSI:  28 GPM

MAX LIFT:  25'

MAXIMUM DISCHARGE PRESSURE:  46 PSI

MAXIMUM TOTAL PRESSURE (Inlet + Pump Pressure):  55 PSI

SUCTION SIZE:  1 ½" NPT (female)

DISCHARGE SIZE:  1 ½" NPT (female)

AMP DRAW (full load):  7.4 amps on 230v / 14.8 amps on 115v

VOLTAGE:  230V / 115V AC, 60 Hz

MAXIMUM WATER TEMPERATURE:  140°F (60°C)

Owner's Manual: 3410P, 33415P, 3420P
DOWNLOAD MANUAL
Specifications: 3410P, 3415P, 3420P
DOWNLOAD SPECS
General Sprinkler Pump Resources Available in Resource Center
INSTALLATIONPRIMINGRELAY BOX INSTALLATIONWINTERIZING THE PUMP
More Resources Available In Our Resource Center
GO TO RESOURCE CENTEROPEN RESOURCE CENTER IN NEW WINDOW
Sprinkler Pump Priming Notice
DOWNLOAD