3210C | 1 HP CONVERTIBLE DEEP WELL CAST IRON JET PUMP
 

Print  print

Performance

Where To Buy

Find a store near you that sells Simer® products.  Use our Store Locator.

Frequently Asked Questions

Have a question about your product?

Winterizing

Learn helpful tips to keep your pump performing properly throughout the winter months

Troubleshooting

Just because you're having a problem does NOT mean there's nothing you can do.  Our troubleshooting section has lots of tips and simple tests so you can determine whether the problem is simple or not.  In most cases, you can get your pump up-and-running using these simple tips.

Product Images

Model 3210C

1 HP Convertible Deep Well Cast Iron Jet Pump

Key Features
  • Superior performance at depths to water of 70' or less
  • Rugged cast iron construction
  • Ready-to-install, heavy-duty, dual-voltage 1HP motor preset at 230 volts
  • Self-priming after pump housing is initially filled, check valve or foot valve required
  • Pre-wired pressure switch preset for 30-50 PSI operation
  • Ejector Kit included
Warranty

1-year limited warranty

Specifications    
Resources    

 

BODY CONSTRUCTION:  Cast Iron

HORSEPOWER:  1 HP

MAXIMUM CAPACITY:  17 GPM

FLOW at 10' LIFT and 40 PSI:  13.5 GPM

MAX LIFT:  70'

PRESURE SWITCH SETTING:  30/50

SUCTION SIZE:  1-1/4" NPT

DRIVE SIZE:  1" NPT

DISCHARGE SIZE:  1" NPT

AMP DRAW (full load):  5.5 amps on 230v / 11.0 amps on 115v

VOLTAGE:  230v / 115v AC, 60 Hz (factory preset to 230v)

RECOMMENDED BREAKER:  15 amp on 230v / 20 amp on 115v

Owner's Manual: 2205C, 2207C, 2210C, 3205C, 3207C, 3210C
DOWNLOAD MANUAL
Parts Listing: 2205C, 2207C, 2210C, 3205C, 3207C, 3210C
DOWNLOAD PARTS
Specifications: 3205C, 3207C, 3210C
DOWNLOAD SPECS
More Resources Available In Our Resource Center
GO TO RESOURCE CENTEROPEN RESOURCE CENTER IN NEW WINDOW